GT PRINT MODEL Super-Fast 3D Printer Resin

GT PRINT ™ MODEL is a patent-pending, super-fast 3D-printer resin formulated specifically for fast, accurate printing of orthodontic models for clear aligners and retainers. It is available in water-washable and air-washable formulations.

Easy to Wash – No IPA!

With GT PRINT MODEL, there’s no need for alcohol (IPA) or other dangerous and expensive cleaning solvents. GT PRINT MODEL is available in two, easy-to-wash formulations:

Option #1: Water-Washable

Can be washed using simple tap water…

Option #2: Air-Washable

Can be washed using just air from a standard clinic or laboratory compressor. And with the air-washable formulation, any excess resin you collect when washing is reusable! Just put it back in the printer and print…

Fast-Printing and Fast-Curing

GT PRINT MODEL prints up to 60% faster than standard model resins and cures (after printing) faster than standard resins as well*. Whereas standard model resins print at a rate of around 2.2-2.5 seconds per layer, GT PRINT MODEL resins print at a rate of just 0.8-0.9 seconds per layer.

GT PRINT MODEL - Fast Printing and Curing

* Data on file. Results may vary by specific brand or individual printer. In our testing in general, GT PRINT MODEL prints and cures significantly faster than standard model resins.

Detailed and Accurate Printing

GT PRINT MODEL allows for printing in high detail and with high dimensional accuracy, well within the tolerances typically required for aligner and retainer models.

High Strength for More Accurate Thermoforming

After proper printing and curing, models printed with GT PRINT MODEL are super-strong. This strength helps the models maintain their printed dimensions during thermoforming, which helps you make better-fitting aligners and retainers!

Material Property Testing Standard GT PRINT ™ MODEL Results
Tensile Strength at Yield ASTM D 638 58 MPa
Elongation at Break ASTM D 638 11%
Flexural Modulus ASTM D 790 2.5 GPa
Flexural Strength ASTM D 790 94 MPa
IZOD Impact Strength (Notched) ASTM D 256 54 j/m
Hardness (Shore D) ASTM D 785 83
* Data from fully-cured models tested by an independent laboratory to the listed standards

Easy to Pour and Easy to Clean

Standard model resins tend to be more syrupy and sticky, but GT PRINT MODEL flows more like water. Its super-low viscosity makes GT PRINT MODEL easier to pour and easier to clean from your printer when done.

Viscosity (Pourability)

3D Printer Model Resins Viscosity (Pourability)
Water 1
Apple Sauce 450
Caramel (@60°C) 400
Standard Resin 800
  • 1k
  • 750
  • 500
  • 250
  • 1
Viscosity (CST; lower number = easier to pour)

Engineered for Easier Recycling

GT PRINT MODEL is engineered to start self-degrading within about one week after use, depending on environmental conditions:

Even if you are not participating in recycling programs, this feature should help reduce the amount of space taken up by your discarded models.

If you do have recycling programs available in your area (such as using the discarded material as a filler in various laboratory materials or building substances), this feature should help make the discarded models easier to incorporate into those programs.


We have special pricing to make it easy to get started with GT PRINT MODEL. Just choose the version that’s best for you:

GT PRINT MODEL Water-Washable

GT PRINT MODEL - Water-Washable, Super-Fast 3D Printer Resin
July 2024 SPECIAL PRICE $139 $99 per bottle (1kg)
In Stock
  • Color: Beige
  • Super-Fast Printing
  • Water-Washable (No IPA)
  • Easy-to-Pour (Pours like Water)


GT PRINT MODEL - Air-Washable, Super-Fast 3D Printer Resin
July 2024 SPECIAL PRICE $149 $109 per bottle (1kg)
In Stock
  • Color: Ruby Red
  • Super-Fast Printing
  • Air-Washable (No IPA)
  • Easy-to-Pour (Pours like Water)
  • No Extensive Shaking or Mixing Required
  • No Waste (Excess Resin from Cleaning is Reusable)

Next Up: GT PRINT ™ MODEL Printing Instructions