GT PRINT MODEL Detailed Instructions for Specific Printers

GT PRINT ® MODEL has been tested on dozens of printers already. And we’re always adding more. If you don’t see your printer on this list, please contact us. We’d be happy to help you dial in the correct settings for your specific printer.

  • GT PRINT MODEL Settings for Ackuretta Dentiq 3D Printers

    Ackuretta Dentiq

    • Base Layers: 2 layers @ 50 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 1.5 sec. exposure
      • 100 µm Thickness: 3.0 sec. exposure
    • Wait before/after Cure: 0.1 sec.

  • GT PRINT MODEL Settings for Ackuretta FreeShape 120 3D Printers

    Ackuretta FreeShape 120

    • Base Layers: 2 layers @ 50 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 1.5 sec. exposure
      • 100 µm Thickness: 3.0 sec. exposure
    • Wait before/after Cure: 0.1 sec.

  • GT PRINT MODEL Settings for ANYCUBIC Photon 3D Printers

    ANYCUBIC Photon

    • Base Layers: 4 layers @ 15 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 1.4 sec. exposure
      • 100 µm Thickness: 1.7 sec. exposure
    • Off Time (between All Layers): 0.5 sec.

  • GT PRINT MODEL Settings for ANYCUBIC Photon Mono 3D Printers

    ANYCUBIC Photon Mono

    • Base Layers: 4 layers @ 15 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 1.4 sec. exposure
      • 100 µm Thickness: 1.7 sec. exposure
    • Off Time (between All Layers): 0.5 sec.

  • GT PRINT MODEL Settings for ANYCUBIC Photon Mono SE 3D Printers

    ANYCUBIC Photon Mono SE

    • Base Layers: 4 layers @ 15 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 1.4 sec. exposure
      • 100 µm Thickness: 1.7 sec. exposure
    • Off Time (between All Layers): 0.5 sec.

  • GT PRINT MODEL Settings for ANYCUBIC Photon Mono X 3D Printers

    ANYCUBIC Photon Mono X

    • Base Layers: 4 layers @ 15 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 1.4 sec. exposure
      • 100 µm Thickness: 1.7 sec. exposure
    • Off Time (between All Layers): 0.5 sec.

  • GT PRINT MODEL Settings for Carima IM2 3D Printers

    Carima IM2

    • Base Layers: 7.0 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 4.0 sec. exposure

  • GT PRINT MODEL Settings for Creality3D LD-002H 3D Printers

    Creality3D LD-002H

    • Layer Height: 0.05
    • Base Layers:
      • Exposure: 4 layers @ 60 sec. exposure each
      • Light-Off Delay: 6.5 sec.
      • Lift Speed: 90
    • Regular Layers:
      • Exposure: 6 sec.
      • Light-Off Delay: 8.5 sec.

  • GT PRINT MODEL Settings for Creality3D LD-002R 3D Printers

    Creality3D LD-002R

    • Layer Height: 0.05
    • Base Layers:
      • Exposure: 4 layers @ 60 sec. exposure each
      • Light-Off Delay: 6.5 sec.
      • Lift Speed: 90
    • Regular Layers:
      • Exposure: 6 sec.
      • Light-Off Delay: 8.5 sec.

  • GT PRINT MODEL Settings for HyVISION Cubicon Printers

    Cubicon

  • GT PRINT MODEL Settings for ELEGOO Saturn 4k 3D Printers

    ELEGOO Saturn 4k

    • Base Layers:
      • 50 µm or 100 µm Thickness: 2 layers @ 20 sec. exposure each
      • Off Time: 240 sec.
    • Regular Layers:
      • 50 µm Thickness: 2.5 sec. exposure, 90 sec. off time
      • 100 µm Thickness: 3.5 sec. exposure, 90 sec. off time
    • Lift Height (All Layers): 6
    • Lift Speed (All Layers): 1.0
    • Retract Speed (All Layers): 3.0

  • GT PRINT MODEL Settings for ELEGOO Mars 2 3D Printers

    ELEGOO Mars 2

    • Base Layers:
      • 50 µm Thickness: 2 layers @ 40 sec. exposure each, 240 sec. off time
      • 100 µm Thickness: 2 layers @ 60 sec. exposure each, 240 sec. off time
    • Regular Layers:
      • 50 µm Thickness: 1.5 sec. exposure, 90 sec. off time
      • 100 µm Thickness: 2.0 sec. exposure, 90 sec. off time
    • Lift Height (All Layers): 6
    • Lift Speed (All Layers): 1.0
    • Retract Speed (All Layers): 3.0

  • GT PRINT MODEL Settings for ELEGOO Mars 2 Pro 3D Printers

    ELEGOO Mars 2 Pro

    • Base Layers:
      • 50 µm Thickness: 2 layers @ 40 sec. exposure each, 240 sec. off time
      • 100 µm Thickness: 2 layers @ 60 sec. exposure each, 240 sec. off time
    • Regular Layers:
      • 50 µm Thickness: 1.5 sec. exposure, 90 sec. off time
      • 100 µm Thickness: 2.0 sec. exposure, 90 sec. off time
    • Lift Height (All Layers): 6
    • Lift Speed (All Layers): 1.0
    • Retract Speed (All Layers): 3.0

  • GT PRINT MODEL Settings for EPAX E6 3D Printers

    EPAX E6

    • Base Layers: 4 layers @ 35 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 5.0 sec. exposure

  • GT PRINT MODEL Settings for EPAX E10 3D Printers

    EPAX E10

    • Base Layers: 4 layers @ 35 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 5.0 sec. exposure

  • GT PRINT MODEL Settings for EPAX X1K 3D Printers

    EPAX X1K

    • Base Layers: 4 layers @ 35 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 5.0 sec. exposure

  • GT PRINT MODEL Settings for EPAX X10 3D Printers

    EPAX X10

    • Base Layers: 4 layers @ 35 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 5.0 sec. exposure

  • GT PRINT MODEL Settings for HyVISION Cubicon Lux & Lux HD Printers

    HyVISION Cubicon Lux & Lux HD

    • Thickness: 0.1
    • Layers 1-2:
      • Exposure Time: 20.0 sec.
      • Lift Distance / Speed:: 2 / 0.5
      • Tilt / Tilt Speed:: 2.0 / 0.7
      • Blink Time: 2.0
    • Layers 3-4:
      • Exposure Time: 15.0 sec.
      • Lift Distance / Speed:: 2 / 1.5
      • Tilt / Tilt Speed:: 2.0 / 0.7
      • Blink Time: 2.0
    • Layers 5-6:
      • Exposure Time: 10.0 sec.
      • Lift Distance / Speed:: 2 / 2.0
      • Tilt / Tilt Speed:: 0 / 0.7
      • Blink Time: 0
    • Layers 7+:
      • Exposure Time: 3.5 sec.
      • Lift Distance / Speed:: 2 / 2.0
      • Tilt / Tilt Speed:: 0 / 0.7
      • Blink Time: 0

  • GT PRINT MODEL Settings for Longer Orange 30 3D Printers

    Longer Orange 30

    • Base Layers: 2 layers @ 90 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 15.0 sec. exposure

  • GT PRINT MODEL Settings for MiiCraft 125 3D Printers

    MiiCraft 125

    • Base Layers: 2 layers @ 15 sec. exposure each
    • Regular Layers:
      • 100 µm Thickness: 1.8 sec. exposure
    • Light Power: Normal

  • GT PRINT MODEL Settings for Peopoly Phenom Noir 3D Printers

    Peopoly Phenom Noir

    • Base Layers:
      • 50 µm Thickness: 3 layers @ 120 sec. exposure each, 3.0 sec. off time
    • Regular Layers:
      • 50 µm Thickness: 4.0 sec. exposure, 1.0 sec. off time
    • Lift Height (All Layers): 10
    • Lift Speed (All Layers): 50
    • Retract Speed (All Layers): 20

  • GT PRINT MODEL Settings for Peopoly Phenom L 3D Printers

    Peopoly Phenom L

    • Base Layers: 6 layers @ 60 sec. exposure each
    • Regular Layers:
      • 100 µm Thickness: 20 sec. exposure

  • GT PRINT MODEL Settings for Phrozen Sonic Mega 8K 3D Printers

    Phrozen Sonic Mega 8K

    • Layer Height: 0.1mm (100 µm)
    • Bottom Layer Count: 8
    • Exposure Time: 3.810 sec.
    • Bottom Exposure Time: 20 sec.
    • Transition Layer Count: 6
    • Transition Type: Linear
    • Transition Time Decrement: 2.310 sec.
    • Waiting Mode During Printing: Restin.
    • Rest Time Before Lift: 0 sec.
    • Rest Time After Lift: 0 sec.
    • Rest Time After Retract: 1 sec.
    • Bottom Lift Distance: 7mm
    • Lifting Distance: 6mm
    • Bottom Retract Distance: 7mm
    • Retract Distance: 6mm
    • Bottom Lift Speed: 150mm/min
    • Lifting Speed: 150mm/min
    • Bottom Retract Speed: 200mm/min
    • Retract Speed: 200mm/min

    Special thanks to Dr. Rick Ferguson for validating these settings

  • GT PRINT MODEL Settings for Phrozen Sonic Mighty 4K 3D Printers

    Phrozen Sonic Mighty 4K

    • Base Layers:
      • 50 µm Thickness: 2 layers @ 85 sec. exposure each, 3.0 sec. off time
    • Regular Layers:
      • 50 µm Thickness: 4.0 sec. exposure, 1.0 sec. off time
    • Lift Height (All Layers): 10
    • Lift Speed (All Layers): 50
    • Retract Speed (All Layers): 20

  • GT PRINT MODEL Settings for Phrozen Sonic Mini 4K 3D Printers

    Phrozen Sonic Mini 4K

    • Layer Height: 0.1mm (100 µm)
    • Bottom Layer Count: 6
    • Transition Layer Count: 0
    • Transition Type: Linear
    • Exposure Time: 3.825 sec.
    • Bottom Exposure Time: 25 sec.
    • Light-off Delay: 8 sec.
    • Bottom Light-off Delay: 8 sec.
    • Bottom Lift Distance: 6mm
    • Lifting Distance: 6mm
    • Bottom Lift Speed: 80mm/min
    • Lifting Speed: 80mm/min
    • Retract Speed: 150mm/min

    Special thanks to Dr. Rick Ferguson for validating these settings

  • GT PRINT MODEL Settings for Qidi Tech Shadow 5.5S 3D Printers

    Qidi Tech Shadow 5.5S

    • Base Layers: 2 layers @ 50 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 10 sec. exposure

  • GT PRINT MODEL Settings for Rapid Shape D30+ and D40 II 3D Printers

    Rapid Shape D30+ & D40 II

    • Energy: 200
    • Support Width: 100
    • Offset: 0
    • Shrinkage: 0.4
    • Z Compensation: 0
    • Process Parameters: Open Material
    • Burn-in Factor: 150% to 200%

  • GT PRINT MODEL Settings for Shining 3D AccuFab-D1 3D Printers

    Shining 3D AccuFab-D1

    • Base Layers: 5 layers @ 16 sec. exposure each
    • Regular Layers:
      • 50 µm Thickness: 4.0 sec. exposure

  • GT PRINT MODEL Settings for Phrozen Sonic Mighty 4K 3D Printers

    Sonic

  • GT PRINT MODEL Settings for Uniz Slash Printers

    Uniz Slash

    • Coming Soon

  • GT PRINT MODEL Settings for XYZ Nobel 1.0 A Printers

    XYZ Nobel 1.0 A

    • 50 µm or 100 µm Thickness: Laser Power/Speed:
      • First Two Layers: 160mw / 10
      • Intermediary Layers: 160mw / 30
      • Regular Layers: 160mw / 55
    • Lift Distance (All Layers): 5 mm

  • GT PRINT MODEL Settings for Zortrax Inkspire Printers

    Zortrax Inkspire

    • Base Layers: 3 layers @ 120 sec. exposure each
    • Regular Layers:
      • 100 µm Thickness: 11.0 sec. exposure

Ackuretta Dentiq and FreeShape 120 are trademarks of Ackuretta Technologies Private Limited. ANYCUBIC Photon, Photon Mono, Photon Mono SE, and Photon Mono X are trademarks of ShenZhen ANYCUBIC Technology Co., Ltd. Carima IM2 is a trademark of Carima Co., Ltd. Creality3D LD-002H and LD-002R are trademarks of Creality3D. ELEGOO Saturn 4k, Mars 2, and Mars 2 Pro are trademarks of ELEGOO INC. EPAX E6, E10, X1K, and X10 are trademarks of EPX 3D. HyVISION Cubicon Lux and Lux HD are trademarks of HyVISION. Longer Orange 30 is a trademark of Longer3D. MiiCraft 125 is a trademark of MiiCraft. Peopoly Phenom Noir and Phenom L are trademarks of Peopoly. Phrozen Sonic Mega 8K, Phrozen Sonic Mighty 4K, and Phrozen Sonic Mini 4K are trademark of Phrozen Technology. Qidi Tech Shadow 5.5S is a trademark of Qidi Technology. Rapid Shape D30+ and D40 II are trademarks of Rapid Shape GmbH. Shining 3D AccuFab-D1 is a trademark of Shining 3D. SprintRay Pro 55, 95, and MoonRay S/D are trademarks of SprintRay Inc. Uniz Slash, Slash 2, Slash 2 Plus, and Slash 2 Pro are trademarks of Uniz Technology LLC. XYZ Nobel 1.0 A is a trademark of XYZprinting, Inc. Zortrax Inkspire is a trademark of Zortrax S.A.

Try GT PRINT ™ Model Today

Next Up: GT FLEX ® Clear Aligner & Retainer Materials